
Mon-Fri 8am-5pm EST
1-800-416-1298
PO Box 647
Exeter, NH 03833
( Physical Address)
16 Kingston Road Unit 4
Exeter, NH 03833
Metal Railing – Convenience And Durability
The article gives the advantage of metal railing over the other
materials and the different types of metals in which the railings
can be made. Metal railings have inherent advantages over other
materials like PVC, wood glass etc. The advantages can be enumerated
as follows.
Small and lightweight sections can be made to suit purpose.
No rot or splintering like wood railings
Designs can be personalized with relative ease.
Can be made from casting or flat product to suit your style and
budget
They are more durable than the wood or PVC even in out door
conditions
Once given a coat of powder-coated paint, it becomes long lasting
and life in excess of 25 to 30 years can be achieved.
Requires no maintenance other than wiping off with a wet cloth
The Metals in Common Use In Railings
Many metals are used in making railings. The common materials used
are,
Stainless Steel: Stainless steel is the most commonly use material
in railing. This is because of its large weight to strength ratio
and the ability to retail luster for long time with no maintenance
and also due the fact that it does not corrode. The workability of
stainless steel is high and it can pass through power presses
without damage. It gives a modern look to the building
Wrought iron: Another common material used in railing is wrought
iron. This material gives a period look to the building. The weight
of the railings made out of wrought iron is high. The maintenance
requirements are almost nil. A coat of paint applied properly, will
make look as new and no further care other than cleaning is
required. If there is a breakage, it is difficult to weld and has to
be replaces. The replacement may not be available in the same design
Aluminum: Lightweight and durable, aluminum is suitable for straight
lines and square shapes. The workability of aluminum is low and
where lines are curved, aluminum is generally not preferred.
Maintenance requirements are the same as stainless steel and
aluminum has a long life
Brass used to be a favored material for the rich and famous in the
medieval times. This material has lost its place in the railing
industry and now it is rarely used except as a covering for railing.
The covering is maintenance prone in the sense that it requires to
be polished frequently to make it look new.
Therefore, out of the four materials mentioned above, only stainless
steel finds extensive use in modern buildings.
About the Author:
D. Benjamin Castonguay is the owner of iapsales.com
LLC - a family business specializing in
HVAC products. We are distributors of
Qmark Heaters,
electric
tankless water heaters, bathroom
heaters, patio heaters,
electric heaters,
portable air
conditioners &
electric towel warmers. Shop on line at
www.heateroutlet.com for these great home improvement products.
Iapsales.com LLC was established in 2003 and is the sister company to Innovative Air Products located in historical Exeter, NH. We are a 2nd generation manufacturers’ rep firm dedicated to providing residential & commercial heating, ventilation and air-conditioning equipment. We offer a great selection online at the lowest prices anywhere. We can also be found on Facebook, Twitter and YouTube.