|
Qmark CRA1512T2
Electric Wall Heater.
Electric wall heaters are ideal for a bathroom, bedroom, kitchen &
more. Electric wall heaters will heat a 150 sq. ft. room.
Dimension:
Front Grille Dimension
10-1/2"W x 12-1/4" H x 3/4" D
Hole Opening Dimension
9-3/8" W x 11-1/8" H x 3-3/4" D
Qmark CRA1512T2:
- 120 Volts 1 ph,
- 12.5 Amps,
- 1,500 Watts (5,118 BTH/HR)
- Wire Size 12 AWG
- 15 Amp Circuit Breaker or Fuse Size
- 11 Lbs
THERMOSTAT -
- Built-in snap action thermostat
COLOR :
- Northern White powder paint finish.
HEATER ASSEMBLY:
The heater assembly which fits into the
back box shall consist of a heavy gauge steel fan panel upon which
is mounted all of the operational parts of the heater.
HEATING ELEMENT:
The heating element is guaranteed for
five years and shall be of non-glowing design consisting of quality
nickel chromium resistance wire. It shall provide quick, uniform
heat and shall operate in the black heat range. The element shall
cover the entire air discharge area to ensure uniform heating of all
discharge air. The wattage output of the unit shall be adjustable by
clipping jumpert wires on a wattage control terminal board and upon
final installation have a permanent means of fixed wattage. See
Clipn- fit® feature below.
FAN AND MOTOR:
The fan is made of four bladed of VALOX 420
material. The fan motor shall be a shaded 2 pole motor, impedance
protected, class “B” insulation with permanently lubricated
bearing.
THERMOSTAT:
The thermostat is made of the bi-metallic, 2 poles,
snap action type with enclosed contacts.
THERMAL CUTOUT:
A thermal cutout is built into the
system to shut off the heater in the event of overheating.
FRONT COVER:
The louvered front cover is made of heavy gauge
steel finished in Northern White high temperature powder paint.
BACKBOX:
The backbox is designed for duty as a recessed
box in either masonry or frame installations and is also used with
the surface mounting frame in surface mounting installations. The
back box shall be heavy gauge galvanized steel and shall contain
knockouts through which power leads are brought in for wiring.
THREE PIECE DESIGN:
The heater is made up of a backbox, a heater assembly and a
front panel for recessed installations. Surface mounting
installations shall required the use of a surface mounting frame.
UL Listed
Warranty:
- Limited 5 Year warranty on Element or Motor
Qmark CRA1512T2 Electric Wall Heater.
Electric wall heaters are ideal for a bathroom, bedroom, kitchen &
more. Electric wall heaters will heat a 150 sq. ft. room.
|
