|
Qmark CRA2024-T2
Electric Wall Heaters.
Electric wall heaters are ideal for a bathroom, bedroom, kitchen &
more. Electric wall heaters will heat a 200 sq. ft. room.
Dimension:
Front Grille Dimension
10-1/2"W x 12-1/4" H x 3/4" D
Hole Opening Dimension
9-3/8" W x 11-1/8" H x 3-3/4" D
Qmark Model CRA2024-T2:
- 240 Volts 1 ph,
- 8.3 Amps,
- 2,000 Watts (6,824 BTH/HR)
- Wire Size 14 AWG
- 15 Amp Circuit Breaker or Fuse Size
- 11 Lbs
THERMOSTAT -
- Built-in snap action thermostat
COLOR :
- Northern White powder paint finish.
HEATER ASSEMBLY:
The heater assembly which fits into the back box shall
consist of a heavy gauge steel fan panel upon which is mounted all
of the operational parts of the heater.
HEATING ELEMENT:
The heating element is guaranteed for five years and shall be
of non-glowing design consisting of quality nickel chromium
resistance wire. It shall provide quick, uniform heat and shall
operate in the black heat range. The element shall cover the entire
air discharge area to ensure uniform heating of all discharge air.
The wattage output of the unit shall be adjustable by clipping
jumpert wires on a wattage control terminal board and upon final
installation have a permanent means of fixed wattage. See Clipn-
fit® feature below.
FAN AND MOTOR:
The fan is made of four bladed of VALOX 420 material. The fan
motor shall be a shaded 2 pole motor, impedance protected, class “B”
insulation with permanently lubricated bearing.
THERMOSTAT:
The thermostat is made of the bi-metallic, 2 poles, snap action type
with enclosed contacts.
THERMAL CUTOUT:
A thermal cutout is built into the system to shut off the heater in
the event of overheating.
FRONT COVER:
The louvered front cover is made of heavy gauge
steel finished in Northern White high temperature powder paint.
BACKBOX:
The backbox is designed for duty as a recessed box in either masonry
or frame installations and is also used with the surface mounting
frame in surface mounting installations. The back box shall be heavy
gauge galvanized steel and shall contain knockouts through which
power leads are brought in for wiring.
THREE PIECE DESIGN:
The heater is made up of a backbox, a heater assembly and a front
panel for recessed installations. Surface mounting installations
shall required the use of a surface mounting frame.
UL Listed
Warranty:
- Limited 5 Year warranty on Element or Motor
Qmark Model CRA2024-T2 - Electric Wall Heaters
Electric wall heaters are ideal for a bathroom, bedroom, kitchen &
more. Electric wall heaters will heat a 200 sq. ft. room.will heat a 200 sq. ft. room.
|
