Qmark CWH1151DS Electric Wall Heater

(click photo to enlarge)

Heats a 150 Square Foot Room
1,500 (5,120 BTU/HR)
120 Volts
Built-in Thermostat Only
Qmark CWH1151DS

Base Price $ 174

	- Owner's Manual
	- Brochure
	- Visit Factory Web Site
	- View More Wall Heaters

Product #: Qmark CWH1151DS
Finish: Northern White
Width: Grille 10 11/16"
Height: Grille 12 1/8"
Depth: Grille 1 1/4"
Wattage: 1,500 (5,120 BTU/HR)
Shipping Weight: 10.5 lbs.
Volts: 120
CFM: 65
Controls: Built-in Thermostat (40° - 85°F)
Amps: 12.5
Warranty: Limited 5 Year warranty on Element or Motor

Qmark CWH1151DS Electric wall heaters

Dimension:
Front Grille Dimension
10-11/16" W x 12-1/8" H x 1 1/4" D
Hole Opening Dimension
9-1/2" W x 11-1/4" H x 3-3/4" D

Qmark CWH1151DS :
- 120 Volts 1 ph,
- 12 AWG Wire
- 12.5 Amps
- 65 CFM
- 1,500 ,Watts (5,120 BTU/HR)
- 10.5 Lbs shipping weight

Color - Northern White durable polyester powder coat finish and aluminum frame.

Features:
Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area.

FAN DELAY: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during start up. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level.

Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment.

Motor is totally enclosed, impedance protected with permanently lubricated bearings.

Airflow system maximizes air volume at minimum noise level;
65 CFM.

Rugged louvered commercial grade steel grille creates downflow air pattern.

The heater may be wired with standard building wire (60°C). Refer to specification chart for correct supply voltage and wire size.

Built-in snap action thermostat (no radio/TV interference; 40° - 85°F).

A hole plug is provided for tamper resistant installations.

Includes Built-In Disconnect Switch.

MOUNTING LIMITATIONS:
1.Do not install heater closer than 4” from floor.
2. Do not install heater behind towel rack, behind door, in floor, in ceiling, in closet, or where air flow may be obstructed.
3. Requires 3 wires if remote thermostat is desired.

Qmark CWH1151DS Electric Wall Heaters.

(click photo to enlarge)