|
|
Qmark CWH1202DSAG
Electric Wall Heaters |
|
|
| |
|
Heats a 200 Square
Foot Room
2,000 (6,826 BTU/HR)
240 Volts
Built-in Thermostat Only
Qmark CWH1202DSAG
|
|
Base Price
$ 212
|
|
|
|
|
|
|
|
Product #: Qmark CWH1202DS-AG
Finish: Statuary Bronze
Width: Grille 10 11/16"
Height: Grille 12 1/8"
Depth: Grille 1 1/4"
Wattage: 2,000 (6,826 BTU/HR)
Shipping Weight: 10.5 lbs.
Volts: 240
CFM: 65
Controls: Built-in Thermostat (40° - 85°F)
Amps: 8.4
Warranty: Limited 5 Year warranty on Element or
Motor
|
Qmark CWH1202DS-AG
Fan Forced Electric wall heaters
Dimension:
Front Grille Dimension
10-11/16" W x 12-1/8" H x 1 1/4" D
Hole Opening Dimension
9-1/2" W x 11-1/4" H x 3-3/4" D
Qmark CWH1202-DS
:
- 240 Volts 1 ph,
- 14 AWG Wire
- 8.4 Amps
- 65 CFM
- 2,000 ,Watts (6,826 BTU/HR)
- 10.5 Lbs shipping weight
Color
- Statuary Bronze durable polyester powder coat finish and aluminum
frame.
Features:
Heating element is heavy duty steel fins brazed to steel sheathed
tubular elements in a grid pattern that covers the entire discharge
area.
FAN DELAY:
On a call for heat, element is energized but fan is delayed until
element is warm, eliminating the circulation of cold air during
start up. When the thermostat is satisfied, the element is
de-energized, but the fan continues until all heated air is
discharged providing longer component life and higher comfort
level.
Designed for easy installation. Heater is mounted prior to wiring.
Both hands are free to make field connections in roomy compartment.
Motor is totally enclosed, impedance protected with permanently
lubricated bearings.
Airflow system maximizes air volume at minimum noise level;
65 CFM.
Rugged louvered commercial grade steel grille creates downflow air
pattern.
The heater may be wired with standard building wire (60°C). Refer to
specification chart for correct supply voltage and wire size.
Built-in snap action thermostat (no radio/TV
interference; 40° - 85°F).
A hole plug is provided for tamper resistant installations.
Includes Built-In
Disconnect Switch.
Statuary Bronze durable polyester powder coat finish and aluminum
finish.
MOUNTING
LIMITATIONS:
1.Do not install
heater closer than 4” from floor.
2. Do not install heater behind towel rack, behind door, in floor,
in ceiling, in closet, or where air flow may be obstructed.
3. Requires 3 wires if remote thermostat is
desired.
Qmark CWH1202DS-AG Fan Forced Electric Wall
Heaters. |
(click photo
to enlarge)click photo
to enlarge)
|
|
|
