|
Qmark LFK484
Electric Wall Heater.
Electric wall heaters will heat up to 480 sq. ft. room. 4,800 watts
(16,382 BTU's). Electric wall heaters perform exceptionally well in
such applications as an entryway, playroom, basement, workshop,
garage, store and similar large areas.
Dimension:
Front Grille Dimension
15 3/4"W x 19 1/8"H x 1 3/8"D
Hole Opening Dimension
14 5/8"W x 18 1/4"H x 3 3/4"D
Weight: 22
Lbs
Color: Northern
White louvered cover.
Qmark LFK484
- 240v,
- 4,800 watts,
- 16,382 BTU/HR
- 20.9 Amps,
Made in U.S.A.
Suitable for Residential, commercial or industrial areas requiring
electric fan forced heaters 4,800 watt capacities. They perform
exceptionally well in such applications as motels, entryways,
playrooms, basements, workshops, garages, stores and similar large
areas.
Features:
- Steel finned metal sheath electric heating elements with low
sheath temperature provide uniform heat and long service life.
- Rugged stamped steel front cover provides a down-flow air pattern
and is attractively finished in Navajo white. A hole plug is
provided for tamper resistant installations.
- Integral double pole thermostat with positive off.
- Thermal overheat protector disconnects power in event of
overheating due to accidental blockage.
-Built-in fan delay switch energizes fan motor only after elements
are heated...prevents discharge of unheated air. When heat shuts
off, de-energizes fan motor after residual heat has been
dissipated.
- Can be wired with standard 60°C wire.
- Permanently lubricated totally enclosed fan motor provides long
life and low maintenance; gently distributes warmth throughout room
area.
-100 CFM.
THERMOSTAT:
-Double pole thermostat is of the bimetallic, snap-action type with
enclosed contacts.
THERMAL CUTOUT:
- A thermal cutout is built into the system to shut off the heater
in the event of overheating.
BACK BOX:
- The back box is designed for duty as a recessed rough-in box in
either masonry or frame installations. The back box is commercial
grade galvanized steel and shall contain knockouts through which
power leads are brought.
FRONT COVER:
The louvered front cover is of commercial grade steel finished in
Navajo White.
FINISH:
All sheet metal parts, except the back box is phosphatized, then
completely painted by a baked enamel painting process.
FAN DELAY SWITCH:
- Fan delay is by-metallic, snap-action type and shall activate fan
after heating element reaches operating temperature and continue to
operate until the heating element is cool.
Warranty:
- Limited 5 Year warranty on Element or Motor
Qmark LFK484 Electric Wall Heaters |
